Recently, the Bureau of Indian Standards shared the draft version of IS 456:2025 for commentary purposes. The preliminary draft version of IS 456:2025 is the fifth revision of this standard, undertaken after 25 years. The fourth revision was previously published in 2000.
Table of Contents
IS 456 : 2025 Preliminary Draft Version
IS 456 : 2025 Draft Version is circulated only for BIS Members for Commentary Purpose. Here is the list of Content of IS 456 : 2025.
Table of Content of IS 456
- Scope
- References
- Terminology
- Symbols
- Basic of Design
- General Principle
- Criteria for Design
- Process of Design
- Structural Systems
- Quality Control and Quality Assurance
- Joints and Connections
- Maintenance
- Loads and Materials
- Load
- Force Loads
- Deformation Loads
- Design Loads
- Load Combinations
- Structural Materials
- Concrete
- Reinforcing Steel
- Prestressing Materials
- Prestressing System
- Prestressing Grout
- FRP Bars
- Structural Analysis
- General
- Conventional Method
- Strut and Tie Method
- Simplified Estimate
- Moment Frame Structures
- Beams
- Slabs
- Columns and Struts
- Redistribution of Moments
- Deflection and Crack Width in Concrete Members
- Structural Design and Details
- Stability
- Basic Quantities
- Design for Strength
- Serviceability Criteria
- Design for Durability
- Robustness Criteria
- Integrity Criteria
- Restorability Criteria
- Construction
- Storage of Materials
- Concrete
- Concreting Under Special Conditions
- Mass Concreting
- Reinforcing Steel Bars
- Prestressing Steel
- Un-tensioned Steel Bars in Prestressed Concrete Structures
- Special Consideration
- Quality Assurance
- Levels of Quality Assurance
- Requirements of Quality Assurance
- Quality Inspection
- Sampling and Testing of Concrete
- Tests on Concrete Making Materials
- Quality Assurance in Concrete Products
- Quality Assurance in Reinforcement Steel
- Quality Assurance in Prestressing Steel and Grout Work
- Testing of Structures
- High Performance Concrete
- Steel Fiber Reinforced Concrete
- Structural Light Weight Concrete
- Polymer Modified Concrete
- Self-Compacting Concrete
- Roller Compacting Concrete
- Alkali Activated Concrete
- Annex A: List of Cross Referred Standards
- Annex B: Climate Zones
- Annex C: Testing of System With Mechanical Anchorages
- Annex D: Determination Of Mean Carbonation Coefficient K1m From Accelerated Carbonation Resistant Test As Per Is 516 (Part 2/Sec 4)
- Annex E: Determination Of Surface Electrical Resistivity Of Concrete Using Four Point Wenner Probe Method
- Annex F: Residual Strength Tests
- Annex G: Committee Composition
Download the draft version of IS 456 : 2025 by given link as below.
